Cmad Engineering Solution

Supply , Instalaltion, testing and Commissioning  of the Addressable, Push Butoon Type Manual Call Point  along with built in Telephone Jack to connect the Telephone handset for talk back.  The MCP shall be loop powered and shall consume one address per device in loop. The MCP shall have Surfaced Mount/Recessed Mount Back Boxes. 

"Supply of Addressable Beam Detector comprising of separate Light Transmitter and Light Receiver unit, which are installed face-to-face with 15-100M distance between them, and  initiates a fire alarm upon detecting a predetermined obscuration rate in the beam path along its entire length between them, 3 programmable sensitivity settings (dependent on monitoring distance), detection range upto 100M, sensitivity range 5%/m-80%/mNote: Beam detector must be Addressabel type and loop powered. Conventional Beam detector with monitor module will not be acceptabel."

HM-PSE-S2, HM-PSE-S2-I - Photoelectric Smoke DetectorsThe S200A photoelectric smoke detector has a completely new detection chamber design,the result of many years of research and development. This delivers improved responsiveness,reduced sensitivity changes caused by settling dust and reduced false alarms resulting fromingress of insect and other debris. The plug-in unit uses sophisticated processing circuitry thatincorporates smoothing filters to help eliminate transient environmental noise conditions that canbe the cause of unwanted alarms. The devices are managed by embedded software runningcomplex algorithms that further improve resilience to false alarms and improve detection speed.

GST108A Conventional Fire Alarm Control Panel is designed in compliance with EN 54-2 1997 + A1: 2006 & EN 54-4 1997+A1: 2002+A2:2006 standard. It’s compatible with GST conventional detectors, manual call points and sounders. The panel is easy to install and operate. Control functions are enabled by a key switch. Programming functions are enabled by a key switch and an internal switch.