CMAD Engineering Solution

The CF1200 range is available as a high specification 2 loop intelligent addressable control panel, offering sophisticated functionality with simple end user operation. The simplicity of operation, powerful cause and effect programming capability and competitive pricing make the system suitable for a wide range of small to medium sized projects. CF1000 uses soft addressing to minimise installation time and remove the potential for error associated with manual addressing. These panels can operate as a stand alone panel or as part of a network withthe Eaton range of CF3000 panels or other CF1200 panels (additional network card required). The CF1200 range of panels have an integral power supply and are supplied with batteries as standard. An extensive range of compatible intelligent addressable system ancillaries are available to work with the CF1000 range all of which incorporate an integral short circuit isolator to provide maximum protection against short circuit faults on the loop.
Features and benefits • Available in 1 and 2 loop versions • Up to 200 addresses per loop • Full network capability up to 126 panels • Soft addressing • Large versatile touch-screen user interface • Multi-language selection capability • Integral battery and power supply • Flexible cause and effect programming • Simple to operate end user touch-screen interface • Flexible distributed network capability • Full range of compatible accessories • Easy to design system cause and effect using site installer software • Full system integrity with Eaton developed protocol.

• Simplex 4007 es

Minimum order quantity: 01 Piece

• FlashScan protocol
• Surface mount or Flush mount
• Clear cover flap option available
• Flexible non-frangible element option available

Features:

• Single-ended, reflective design.
• 6 User-selectable sensitivity levels.
• 16 to 328 foot (4.9 to 9.10 m) detection range.
• Compatible with UL Listed 24 VDC control panels.
• Integral sensitivity test feature (BEAM1224S).
• Digital display - no special tools required.
• User-friendly alignment procedure.
• Integral automatic gain control compensates for signal deterioration from dust build-up.
• Remote test station (optional).
• Listed to UL Standard 268

TrueAlarm photoelectric sensors use a stable, pulsed LED light source and a silicon photodiode receiver to deliver consistent and accurate low power smoke sensing. There are three user-selectable sensitivities for special applications for each individual sensor: 0.2%, 0.5%, and 1% for each foot. Standard sensitivity is 1.25% to 3.1% for each foot. The fire alarm control unit runs an algorithm that can vary the sensitivity for normal applications between 1.25% and 3.1% for each foot.

Minimum order quantity: 01 Piece

TrueAlarm heat sensors are self-restoring and provide ratecompensated, fixed temperature sensing, you can select with or without rate-of-rise temperature sensing. Due to its small thermal mass, the sensor accurately and quickly measures the local temperature for analysis at the fire alarm control unit. You can select rate-of-rise temperature detection at the control unit for either 15°F or 20°F, (8.3°C or 11.1°C) for each minute. Fixed temperature sensing is independent of rate-of-rise sensing and you can program it to operate at 135°F or 155°F (57.2°C or 68°C). The 4098-9734 sensor provides an additional 190°F (88°C) set point.

Minimum order quantity: 01 Piece

Product Overview :
The Intelligent Fire Detector (Model FP-11) is a highly evolved detection system that provides a very sophisticated level of fire protection, along with superior immunity to nuisance-alarms. Model FP-11 utilizes highly developed detection technology that allows the detector to distinguish non-threatening deceptive phenomena (i.e. − cigarette smoke) from actual fire hazards, while optimizing detection for the area of its intended zone. Model FP-11 uses state-of-the-art microprocessor circuitry with error check; detector self-diagnostics, and supervision programs. Model FP-11 is compatible with the Siemens − Fire Safety Model FPI-32 upgrade kit or Siemens’ field-programmer / tester, Model DPU / FPI-32, which is a compact, portable and menu-driven accessory for efficiently programming and testing detectors electronically. 
Specifications :
Model FP-11 is a plug-in, two-wire and multi-sensor detector with photoelectric and thermal inputs that is compatible with the FireFinder XLS and MXL family of FACPs. Each detector consists of a dust-resistant, field-cleanable photo chamber; a solid-state, nonmechanical thermal sensor, and microprocessor-based electronics with a low-profile plastic cover and base. Model FP-11 utilizes state-of-the-art ASIC and surfacemount technology for maximum reliability. Every Model FP-11 fire detector is shipped with a protective dust cover. Model FP-11 fire detector utilizes an infrared light-emitting diode (IRLED), and light-sensing photodiode

Minimum order quantity: 1 Piece

:-This range of intelligent addressable sensors have been specifically designed to operate with Eaton’s intelligent addressable fire systems.  
:-All sensors are third party approved to the relevant section of EN54 (part 7 for smoke detectors, part 5 for heat detectors and part 17 for short circuit isolators).
Features :
• Soft addressed
• Integral short circuit isolator
• Single address
• Wide range of sensor types
• 360° visibility LED using lightpipe technology
• Drift compensation
• Aesthetically pleasing Benefits
• Quick and simple to install
• Single “multi-mode” heat sensor
• Wide viewing angle for increased LED visibility
• Common mounting base
• Positive “lock” indication
• Discreet design for incorporation into any decor
• Easy to maintain/service

We are engaged in offering to our clients. Our range of all products is widely appreciated by our clients.   

Minimum order quantity: 01 Piece

WSS-PR-N05. Intelligent Wall Mounted Sounder Strobe, Pure White skirt, Red lens. WSS-PR-I05. Intelligent Wall Mounted Sounder Strobe, Red with Isolation.

The Syncro range has been made obsolete and replaced by the Kentec Taktis Range.

Kentec Syncro 4 Loop Fire Control Panel (0 – 96 Zones) Apollo Protocol

Available with 2 or 4 detection circuits, each capable of hosting up to 126 devices (Apollo), 240 devices (Argus Vega) or 127 devices (Hochiki). Syncro uses the most advanced microprocessor technology to provide a control system of extremely high integrity. Syncro can be configured to suit all types of system, from the most simple, to the highly complex. Its fully integrated and secure network provides an intelligent interface for building control.

Minimum order quantity: 1 Piece

The Photoelectric Smoke Detector (Model OP921) uses state-of-the-art microcontroller circuitry and surface-mount technology for maximum reliability. Model OP921 incorporates an optical sensor using a light-scattering detection principle. The device utilizes advanced software algorithms to analyze the signals providing highly stable and accurate smoke detection. 

TrueAlarm sensor bases contain integral addressable electronics that constantly monitor the status of the detachable photoelectric or heat sensors. Each sensor’s output is digitized and transmitted to the system fire alarm control panel every four seconds.

Since TrueAlarm sensors use the same base, different sensor types can be easily interchanged to meet specific location requirements. This feature also allows intentional sensor substitution during building construction. When conditions are temporarily dusty, instead of covering the smoke sensors (causing them to be disabled), heat sensors may be installed without reprogramming the control panel. Although the control panel will indicate an incorrect sensor type, the heat sensor will operate at a default sensitivity providing heat detection for building protection at that location.

TrueAlarm analog sensors provide an analog measurement digitally communicated to the host control panel using Simplex addressable communications. At the control panel, the data is analyzed and an average value is determined and stored. An alarm or other abnormal condition is determined by comparing the sensor’s present value against its average value and time.

Minimum order quantity: 1 Piece

Edward SIGA-IM2 Fault Isolator Module For Isolating Shorted Once activated, the line fault isolator continuously checks the faulted side of the loop to determine if the short still exists. Also, when the fault is removed, is automatically restores the entire data loop to a normal condition. The microprocessor in every module gives at least three important benefits Self-diagnostics and History Log, Mapping, and Fast, Stable Communication. The module?s automatic self-diagnosis identifies when it is defective and causes a troubling message. The user-friendly maintenance program shows the actual state of each module and other pertinent messages. Single modules will turn off (deactivated) temporarily, from the control panel. The availability of maintenance features dependent on the fire alarm system use. Also, to schedule maintenance for proper system operation should be perform to meet the requirements of the Authority Having Jurisdiction.

We are engaged in offering to our clients. Our range of all products is widely appreciated by our clients.   

Siemens HMS-S is an intelligent, single action Pull Station designed for use with Siemens' FireFinder XLS-series control panels. Address programmed by using the (Model DPU) Programmer / Test Unit. Alarm reset with Allen Key.

Connecting to the loop of GST fire alarm system, DI-9204E Digital Manual Call Point (MCP) is suitable for public places. When there is a fire, pressing the frangible element on this MCP can send fire signal to fire alarm control panel. After receiving the signal, the control panel will show address information of the MCP and generate alarm sound.

• Operating Voltage Loop 24V???16V???28V??? 
• Standby Current ≤0.6mA 
• Alarm Current ≤1.8mA Indicator Red. 
• Flashes every 3s normally.
•  Illuminates after alarming. 
•  Type of Initiating Part Reusable
• Initiating Mode Pressing the frangible element manually
• Resuming Mode Manually resumed by a special key
• Programming Mode Electronically addressed 
•  Address Range One address within 1???242. 
• Wiring Polarity-insensitive two-wire 
• Class Type A, indoors. 
•  Ingress Protection Rating IP43 
• Environmental Temperature -10??????+55??? 
• Relative Humidity ≤95%, non condensing 
• Material of Enclosure ABS, red 
• Dimension (L×W×H) 87.1mm×87.1mm×58.5mm (with back box) 87.1mm×87.1mm×23.5mm (without back box) 
• Mounting Hole Distance 60mm 
• Weight About 160g (with back box) About 107g (without back box) 

Minimum order quantity: 01 Piece

We are engaged in offering to our clients. Our range of all products is widely appreciated by our clients.   

TrueAlarm multi-sensor model 4098-9754 combine the established performances of a TrueAlarm photoelectric smoke sensor with a fast-acting and accurate TrueAlarm thermal sensor to provide both features in a single sensor/base assembly.

Minimum order quantity: 01 Piece

Two versions of intelligent addressable callpoints are available in this range, the (CBG370S) which can be either surface or flush mounted and the (CBG370WP) which is a weatherproof version. Both the (CBG370S) and the (CBG370WP) are compatible with the Cooper range of intelligent addressable fire systems. These intelligent addressable callpoints are attractively designed, simple to install and are supplied as standard with a frangible glass element and a test key for ease of maintenance. A comprehensive range of accessories are available to maximise the functionality of the callpoint for particular applications.

Features :

• Soft addressed • ntegral short circuit isolator • Single address • Fast fit clip on front cover • High visibility status LED • Wide range of accessories • Heavy duty terminals • Two models available: - Internal - Weatherproof

Benefits :

• Quick and simple to install • Single tool for test and access • Robust construction • IP65 version available • Easy to maintain/service

Our range of products include Simplex Smoke Head Detector 4098-9714 with Base 4098-9789, NOTIFIER MANUAL CALL POINT F-MCP-GLASS, Honeywell Manual Call Point MI-MCP-GLASS, Morley Addressable Sounder wso-pr-n05, Addressable Manual Call Point GST Make and Copper Manual Call Point (CBG370S).

Minimum order quantity: 1 Piece

Features Individually addressed and controlled multi-candela TrueAlert ES audible/visible (A/V) notification appliances provide: • Multi-candela xenon strobe with synchronized 1 Hz flash rate and with intensity programmable from the fire alarm control unit (FACU) or jumper selected as 15 cd, 30 cd, 75 cd, 110 cd, 135 cd, or 185 cd • Advanced addressable notification controlled by IDNAC SLCs providing regulated 29 VDC allowing strobes to operate with lower current even under battery backup • Wiring supervision to each appliance allowing T-tapped connections for Class B circuits to simplify wiring; class A circuits require in/out wiring • Self-Test Mode allows on-board sensors to detect the strobe and horn output and then report their status to the FACU • TrueAlert Device Reports are available at the FACU detailing appliance point ID, custom label, type, and candela setting • Magnet Test diagnostics assist checkout and testing of appliances and wiring. • Electrical test point access: access the electrical test point without removing cover • Compatibility with ADA requirements; see Installation reference • Compatibility with legacy TrueAlert addressable systems for upgrade and replacement, see TrueAlert ES A/V LEGACY compatibility reference • Strobe operation is listed to UL Standard 1971 and ULC Standard S526; Horn operation is listed to UL Standard 464 and ULC Standard S52
Description TrueAlert ES addressable A/Vs are individually addressed audible/ visible notification appliances that receive power, supervision, and control signals from a Simplex FACU providing IDNAC Signaling Line Circuits (SLCs). See TrueAlert ES A/V LEGACY compatibility reference for more detail.

The SIGA-270 and SIGA-278 series Manual Pull Stations are part of EDWARDS’s Signature Series system. The SIGA-270 Fire Alarm Manual Pull Stations feature our very familiar teardrop shape. They are made from die-cast zinc and finished with red epoxy powder-coat paint complemented by aluminum colored stripes and mark-ings.  With positive pull-lever operation, one pull on the station handle breaks the glass rod and turns in a positive alarm, ensuring protection plus fool-proof operation. Presignal models (SIGA-270P) are equipped with a general alarm (GA) keyswitch for applications where two stage operation is required. The up-front highly visible glass rod discourages tampering, but is not required for proper operation.EDWARDS’s double action single stage SIGA-278 station is a contemporary style manual station made from durable red colored lexan.  To initiate an alarm, first lift the upper door marked “LIFT THEN PULL HANDLE”, then pull the alarm handle.

Application:
The operating characteristics of the fire alarm stations are deter-mined by their sub-type code or “Personality Code”. NORMALLY-OPEN ALARM - LATCHING (Pesonality Code 1) is assigned by the factory; no user configuration is required. The device is configured for Class B IDC operation. An ALARM signal is sent to the loop controller when the station’s pull lever is operated. The alarm con-dition is latched at the station.

Minimum order quantity: 1 Piece

Our addressable range has multiple options for intelligent addressable sensors. All sensors are designed for optimum functionality in mid-large sized builds. They are all soft addressed and have integral short circuit isolators. 
Features and benefits :
• Soft addressed
• Integral short circuit isolator
• Single address
• Wide range of sensor types
• 360° visibility LED using lightpipe technology
• Drift compensation
• Aesthetically pleasing
• Quick and simple to install
• Single “multi-mode” heat sensor
• Wide viewing angle for increased LED visibility
• Common mounting base
• Positive “lock” indication
• Discreet design for incorporation into any decor
• Easy to maintain/service 

Morley IAS MI-MCP-Flex Addressable Flexible Manual Call Point The MI-MCP Series Manual Call Points are designed to provide a manual alarm interface to Morley IAS’s fire alarm control panel. Installation efficiency, flexibility and compliance with the latest standards are at the heart of the call point range. The unique ‘plug and play’ concept is designed specifically to reduce installation time by using a terminal block which can be wired during the initial installation cabling with a link to provide continuity for testing. During the commissioning phase, the links are removed, and the terminal block is simply inserted into the connector at the back of the unit.

Features:

1.Unique ‘Plug & Play’ installation concept
2.Re-settable operating element option
3.Analogue addressable communications 4.Fully compliant with EN54, Part 11 5.Backward compatibility
6.Enhanced aesthetics
7.Integral LED
8.Integral loop isolation option

Get the best price for Morley Red Honeywell  MI-MCP-GLASS

The wall mount sounder is a high quality 32 tone sounder. A choice of output levels and tones make the device suitable for a wide variety of applications. Isolated and non isolated options.

EST’s double action single stage SIGA-278 station is a contemporary style manual station made from durable red colored lexan.  To initiate an alarm, first lift the upper door marked “LIFT THEN PULL HANDLE”, then pull the alarm handle.

The Fire Fighting Telephone Jack is usually seen with the addressable fire alarm system in high-rise buildings, but some low-rise buildings have them. Radio communications in large steel structures can only be unstable at best. During emergencies in a high-rise building, the lobby will initiate a command and talk to the team. They can also send people to the electrical room to control utilities, elevators, etc., and communicate via plug-in phones.

If a fire occurs on the 42nd floor, additional personnel and equipment can be prepared on the 40th floor, and an official will be responsible. You will also have an officer in charge of fire fighting. The readiness officer can hang up the phone in the lobby and talk to the incident commander to communicate resource needs. It also left radio traffic for personnel in fire fighting operations.

Minimum order quantity: 10 unit

• Electrical Panel Fire Suppression System