Cmad Engineering Solution

Individually addressable manual fire alarm stations with: • Power and data supplied by IDNet or MAPNET II addressable communications using a single wire pair • Operation that complies with ADA requirements • Visible LED indicator that flashes during communications and is on steady when the station has been activated • The NO GRIP Single Action Station and Retrofit Kit are available with a more easily operated pull lever for applications where anticipated users may find the standard station lever difficult to activate • Pull lever that protrudes when alarmed • Break-rod supplied (use is optional) • Models are available with single or double action (breakglass or push) operation • UL listed to Standard 38

IDNet or MAPNET II addressable communications supply both data and power over a single wire pair to provide**:  Supervised Class B monitoring of normally open, dry contacts  Total wiring distance from IAM to supervision resistor(s) of up to 500 ft (152 m)  Monitored connection is compatible with Simplex® 2081-9044 Overvoltage Protectors for outdoor wiring or electrically noisy applications  For use in indoor locations up to 158° F (70° C) such as attic spaces or similar applications For use with following Simplex control panels:  Model Series 4007ES, 4008, 4010, 4010ES, and 4100ES fire alarm control panels for IDNet communications  Model Series 4100/4100U/4100ES, 4120, 4020, and 2120 Communicating Device Transponders (CDTs) equipped with MAPNET II communications Model 4090-9001:  Enclosed design minimizes dust infiltration  Mounts in standard single gang electrical box  Screw terminals for wiring connections  Visible LED flashes to indicate communications  Optional covers are available to allow LED to be viewed after installation (requires mounting bracket, ordered separately).
 Model 4090-9051:  Encapsulated design for extended exposure to high humidity (LED is not present on this model)  Color coded 18 AWG leads for wiring IDNet communications provides current limited monitoring:  Provides monitoring of tamper switch (supervisory) and waterflow switch (alarm) on same circuit using one point  Available with IDNet communications only Multiple operation modes are available and are selectable at the control panel:  Contact closure status can be tracked  Momentary contact closure conditions can be selected at the panel to be latched or tracked (not available with the 2120 CDT)

The 4090-9001 Supervised Individual Addressable Module (IAM) provide four-state status information(NORMAL, OPEN, CURRENT-LIMITED, and SHORT) to the 4010 Fire Alarm Control Panel (FACP)via the IDNet channel. The IDNet channel provides the communication link between Supervised IAMand 4010 FACP and powers the entire IAM circuitry. A typical application for this module would be to The 4090-9001 Supervised Individual Addressable Module (IAM) provide four-state status information(NORMAL, OPEN, CURRENT-LIMITED, and SHORT) to the 4010 Fire Alarm Control Panel (FACP)via the IDNet channel. The IDNet channel provides the communication link between Supervised IAMand 4010 FACP and powers the entire IAM circuitry. A typical application for this module would be to

IDNet Relay IAMs allow fire alarm control panels to control a remotely located Form “C” contact using IDNet addressable communications for both data and module power. Typical applications would be for switching local power for control functions such as elevator capture, or control of HVAC components, pressurization fans, dampers, etc. Relay status is also communicated requiring only one device address.
IDNet Relay IAMs allow fire alarm control panels to control a remotely located Form “C” contact using IDNet addressable communications for both data and module power. Typical applications would be for switching local power for control functions such as elevator capture, or control of HVAC components, pressurization fans, dampers, etc. Relay status is also communicated requiring only one device address.

Individual Addressable Relay Module (Relay IAM):
· IDNet addressable control for use with Simplex fire alarm control panel models 4007ES, 4008, 4010, 4010ES, 4100E

Hikvision 2MP 1080P HD Indoor Night Vision Dome Camera ... Analog HD output, up to 1080P resolution, True Day/Night, Smart IR, Up to 20m

• 5MP@20fps, 1/2.7" CMOS Sensor

• AHD / TVI / CVI / CVBS Output

• 3.6mm Fixed Lens

• IP66

• Housing Material: Metal

• IR-Cut Filter Removable

• Back Light Compensation

• Katview

• Smart IR

• Digital Noise Reduction

• ICR

The HIKVISION DS-2CE76H0T-ITPFS is a 5MP audio indoor fixed turret camera with a 2.8mm fixed lens. It features Digital WDR, Smart IR, and a built-in microphone for audio transmission over a coaxial cable. The camera outputs 4 in 1 video (TVI/AHD/CVI/CVBS). 

Hikvision 2MP 1080P HD Indoor Night Vision Dome Camera ... Analog HD output, up to 1080P resolution, True Day/Night, Smart IR, Up to 20m

The P-9910B Hand Held Programmer is the programming tool for all GST addressable devices and some of conventional devices. It is also the tool to set sensitivities, working modes and other parameters.

Feature : 

      Hand held unit, portable tool
      Convenience operation
      Quadruple digit alphanumeric LCD display
      Programs all loop devices (1-242)
      Low-consumption hibernation and power saving function
      Low battery indication

General :
Notifier’s FirstCommand NFC-FFT is a Fire Fighter telephone system that provides secure and reliable communications for firefighters. This standalone system is capable of providing annunciation and control for local and remote telephone handsets. It includes a built in display and keypad that provide an indication of phone activation as well as corresponding trouble conditions. For added flexibility, 24 remote telephone connections are offered that can be monitored individually or as a group of multi-phone jacks. The auto-program feature automatically recognizes all existing fire fighter phone jacks on the system and immediately configures the system for full operation and supervision. 
Features :
• Provides supervision control and annunciation of up to 24 remote telephone jacks.
• Built-in Auto-program feature.
• Simple and straightforward user interface.
• Telephone circuit supervised with 4.7KΩ, End of line resistor when wired in Style Y, Class B operation.
• Full System status LED display.
• Onboard SLC circuit can be wired for class A (Style 6 or Style 7) or class B (Style 4) configuration.
• Full system status LED display.
• Supports Multi-Phone Jack Audio Circuit supervision.
• Certified for seismic applications
• Onboard Form-C system trouble relay.
• Allows simultaneous operation of up to 10 Fire Fighter remote handsets (FHS-F when connected to the NFC-FFT.
• Fire Fighter Phone Jack (N-FPJ provides a plug-in location for the FHS-F.
• Fire Fighter Handset Cabinet (FHSC-R/S) is used to store five Fire Fighter Handsets (FHS-F).
 Temperature and Humidity ranges :
This system meets NFPA requirements for operation at 0-49º C/32-120º F and at a relative humidity 93% ± 2% RH (noncondensing) at 32°C ± 2°C (90°F ± 3°F). However, the useful life of the system's standby batteries and the electronic components may be adversely affected by extreme temperature ranges and humidity. Therefore, it is recommended that this system and its peripherals be installed in an environment with a normal room temperature of 15-27º C/60-80º F

he Model HLIM Loop Isolator Module from Siemens Industry, Inc. isolates short circuits on FireFinder-XLS or FS-250 analog loops. By placing devices between HLIMs during installation, a short in the wiring within that group is disconnected from the rest of the loop. The remainder of the devices continue to operate. The HLIM operates in both Class A and Class B circuits.

We are engaged in offering to our clients. Our range of all products is widely appreciated by our clients.   

Overview :
 SIGI-271 Fire Alarm Call Points are part of Edwards’s Signature Series system. These integrated assemblies feature the familiar KAC Installers’ Series Call Point packaged with Signature Series intelligent addressable/analogue interface electronics. In all 271 Series Call Points, the switch is held off by the edge of the glass. When the glass is broken by pressing directly on it, the switch is released and an alarm sent to the Signature loop controller. A protective plastic coating on the glass prevents operator injury and inhibits the release of glass fragments. Each Signature Series Call Point constantly runs self-checks to provide important maintenance information. The results of the self-check are automatically updated and permanently stored in the Call Point’s non-volatile memory. This information is accessible for review any time at the control panel, PC, or by using the SIGAPRO Signature Program/Service Tool. The information stored in the Call Point’s memory includes:
• Call Point serial number, address, type code.
• Manufacture date, hours of operation, last maintenance date.
• Number of recorded troubles, alarms, time and date of last alarm. • Up to 24 possible trouble codes that may be used to specifically     diagnose faults.
Standard Features :
• Intelligent Device with Integral Microprocessor All decisions are made at the Call Point to allow lower communication speed. Lower communication speeds are less sensitive to line noise; twisted or shielded wire is not required.
• Automatic Device Mapping Each Call Point transmits wiring information regarding its location with respect to other Signature devices on the circuit.
• Electronic Addressing Addresses are downloaded from a PC, or the SIGA-PRO Signature Program/Service Tool. There are no switches or dials to set.
• Non-volatile Memory Permanently stores serial number, type of device, and job number. Automatically updated with historic information.
• Stand-alone Operation Call Point can input an alarm even if the loop controller’s polling interrogation stops.
• Alarm LED Red led flashes to show “alarm” state.
• Designed For High Ambient Temperature Operation Install in ambient temperatures up to 120 °F (49 °C).
• Flush or Surface Mount
• Optional Markings Available Glass inserts with multiple languages   are available.
• Designed To ISO 9001 Standard Manufactured to strict   international quality standards.

We are engaged in offering to our clients. Our range of all products is widely appreciated by our clients.