CMAD Engineering Solution

Minimum order quantity: 01 Piece

INTRODUCTION:
The HTRI Series Addressable Modules from Siemens Industry, Inc., shown in Figure 1, interface direct shorting devices to the DLC loop circuit of the FireFinder-XLS or FS-250 System. The HTRI modules are available in three models. The HTRI-S and HTRI-R can monitor a normally open or closed dry contact. The HTRI-S can only monitor and report the status of the contact, while the HTRI-R incorporates an addressable Form C relay. The HTRI-D is a dual input module that supervises and monitors two sets of dry conta

• Honeywell System Sensor Conventional Fire Alarm Panel

Simplex® compact air duct smoke sensor housings provide TrueAlarm operation for the detection of smoke in air conditioning or ventilating ducts.  Sampling tubes (sold separately) are installed into the duct allowing air to be directed to the smoke sensor mounted in the housing.

The Simplex 4098-9755 is a basic addressable sensor housing; operating power is supplied by either MAPNET II or IDNet communications (No relay output).  A Simplex 4098-9714 sensor is included and installed in the housing.

This duct housing is compatible with the Simplex 4010, 4020, 4100, 4100U, and 4120 fire alarm control panels.  It is also compatible with the Simplex 2120 CDT if configured for MAPNET II, TrueAlarm operation.

Life Safety Consultants is here to ensure your fire and smoke detectors are always in working order. That’s why we offer a wide range of replacement parts and components like the Simplex Duct Housing 4098-9755. Order yours today and we’ll ship your Simplex Duct Housing 4098-9755 in no time.

These panel are a feature packed control unit performing dual function of detection and controlled release of gaseous agent. These panels have 2 detection circuit and 1 agent release circuit with various programmable options. The panel have all the safety feature to prevent accidental release , easy to install, commission with user friendly programmable option, this panel is ideal choice to protect the premises.

• Plastic Edwards / EST (G1AVRF / G1ARF / G1VRF) Hooter cum Strobe

This RECONDITIONED Siemens Pyrotronics FP-11 is an intelligent (addressable) photoelectric smoke detector. Siemens discontinued new production of this part in December of 2019. The Siemens Pyrotronics FP-11 uses state-of-the-art microprocessor circuitry with error check, detector self-diagnostics and supervision programs. The Siemens Pyrotronics FP-11 is compatible with the Pyrotronics MXL family of control panels including the MXL, MXL-IQ, and MXLV. Order yours today, and if you should have any questions regarding this or any Save More on Fire Alarm safety products, contact the Save More on Fire Alarm Parts Consultants team at (877)-368

Minimum order quantity: 01 Set

Description :
The SIGA-SB is the standard base for Signature Series detectors. It connects the detector to the signaling line circuit (SLC), and provides wiring terminals for connection to a SIGA-LED.
To install the SIGA-SB:
1. Mount the SIGA-SB on a compatible electrical box using the   screws provided with the electrical box.
2. Wire the base as shown in the “Wiring” section.
3. Write the address assigned to the detector on the label provided and apply the label to the inside rim of the base.
4. Use a SIGA-TS trim skirt to finish the installation as needed.
To wire the SIGA-SB:
1. Break the wire run at each terminal. Do not loop the signaling line  circuit field wires around the terminals.
2. Insulate the shield with electrical tap

We are engaged in offering to our clients. Our range of all products is widely appreciated by our clients.   

• Ravel Smoke Detectors