CMAD Engineering Solution

The SIGA-270 and SIGA-278 series Manual Pull Stations are part of EDWARDS’s Signature Series system. The SIGA-270 Fire Alarm Manual Pull Stations feature our very familiar teardrop shape. They are made from die-cast zinc and finished with red epoxy powder-coat paint complemented by aluminum colored stripes and mark-ings.  With positive pull-lever operation, one pull on the station handle breaks the glass rod and turns in a positive alarm, ensuring protection plus fool-proof operation. Presignal models (SIGA-270P) are equipped with a general alarm (GA) keyswitch for applications where two stage operation is required. The up-front highly visible glass rod discourages tampering, but is not required for proper operation.EDWARDS’s double action single stage SIGA-278 station is a contemporary style manual station made from durable red colored lexan.  To initiate an alarm, first lift the upper door marked “LIFT THEN PULL HANDLE”, then pull the alarm handle.

Application:
The operating characteristics of the fire alarm stations are deter-mined by their sub-type code or “Personality Code”. NORMALLY-OPEN ALARM - LATCHING (Pesonality Code 1) is assigned by the factory; no user configuration is required. The device is configured for Class B IDC operation. An ALARM signal is sent to the loop controller when the station’s pull lever is operated. The alarm con-dition is latched at the station.

The UL pull stations, APS100 and APS200, are designed to exceed your expectations and offer the most polished, feature rich and cost effective solution. Both the APS100 and APS200 are compatible with the Eaton UL range of intelligent addressable fire systems, and come complete with a ULMCIM-C fast response intelligent addressable input initiating unit. This UL pull station is constructed of high quality, diecast metal for long lasting performance and is designed to be fitted to a single gang back-box for flush mounting. For surface mounting a sheet metal back box (SGB32S) can be utilised. The APS100 and APS200 are painted red with raised white lettering, have a locking mechanism to prevent unauthorized reset and are complete with a UL listed fast response intelligent addressable input initiating module (ULMCIM-C).

The Discovery UL Manual Pull Station is used to manually initiate an alarm signal on the fire detection system.The XP95A Dual Action Addressable Manual Pull Station features a  translucent plastic panel at the centre enabling visibility of an internal LED that indicates alarm condition and polling status. The pull station may be flush mounted on a single gang work box or by using the optional backbox. • Control panel compatibility • Key lock • Easily reset • LED visible even when the Pull Station is closed • Lightweight polycarbonate housing • UL38 Certified•  Reports an alarm in under 0.2 seconds • Key lock • Easily resettable • Suitable for semi flush or surface mounting •  XP95, (Discovery and CoreProtocol compatible)

The UL pull stations, APS100 and APS200, are designed to exceed your expectations and offer the most polished, feature rich and cost effective solution. Both the APS100 and APS200 are compatible with the Eaton UL range of intelligent addressable fire systems, and come complete with a ULMCIM-C fast response intelligent addressable input initiating unit. This UL pull station is constructed of high quality, diecast metal for long lasting performance and is designed to be fitted to a single gang back-box for flush mounting. For surface mounting a sheet metal back box (SGB32S) can be utilised. The APS100 and APS200 are painted red with raised white lettering, have a locking mechanism to prevent unauthorized reset and are complete with a UL listed fast response intelligent addressable input initiating module (ULMCIM-C).